Claas DISCO 3200 / 3600 segadora rotativa

Used but in excellent condition set of CLAAS DISCO 3200 FRC MOVE front and CLAAS DISCO 3600 RC CONTOUR rear mowers. Production year 2021

- Front-mounted mower CLAAS DISCO 3200 FRC MOVE

Year of production: 2021
Working width: 3,00 m
Additional protective gears under all discs (6 mm thick Hardox abrasion-resistant
steel)
Width of the headland 1,20 - 2,20 m
Number of oval discs - 7 pcs
Number of blades per disc - 2 pcs
Knife dimensions: 115 x 48 x 4 mm
Quick blade change without screws
Walterscheidt PTO shaft with 6-pronged fork
Knives rotate 360 degrees around the holder axis
Hardened scrapers at the bottom of the cutting discs protect the blades from abrasion
SAFETY LINK cutting disc protection
MAX CUT cutting bar housing with ideally shaped curves made by stamping
from a solid workpiece
Bolted connection concept - cutting bar body and cover are interconnected
Satellite drive - large drive gears and small diameter cutting discs
gears
Three-dimensional replication of the cutting surface
Crusher speed - 950 rpm
Walterscheidt PTO shaft with 6-groove fork
Required power take-off speed - 1000 rpm, can also work at -
850 rpm
Minimum tractor power required - 70 hp
A-shaped frame for hitching
Requires brackets on the front suspension for mounting springs
High cut gears - 2 pcs (possibility to cut 30 mm higher)
Double-height high-cutting gears - 2 pcs (60 mm cutting height option)
ACTIVE FLOAT - optimum, hydropneumatic adjustment of the cutting beam pressure on the soil,
the weight of the trimmer is transferred from the soil surface to the tractor
Coupling category - II
Weight - 1040 kg

- Rear-mounted mowerCLAAS DISCO 3600 RC CONTOUR

Year of production: 2021
Working width: 3.40 m
Additional protective gears under all discs (6 mm thick Hardox abrasion-resistant
steel)
Height in transport position - 3.57 m
Starting width 1.40 - 2.80 m
Number of oval discs - 8 pcs
Number of blades per disc - 2 pcs
Walterscheidt PTO shaft with 6-pronged fork
Knife dimensions: 115 x 48 x 4 mm
Quick blade change without screws
Knives rotate 360 degrees around the holder axis
Hardened scrapers at the bottom of the cutting discs protect the blades from abrasion
SAFETY LINK cutting blade protection
MAX CUT cutting bar housing with ideally shaped curves made by stamping
from a solid workpiece
Bolted connection concept - cutting bar body and cover are interconnected
Satellite drive - large drive gears and small diameter cutting discs
gears
ACTIVE FLOAT - optimum, hydropneumatic regulation of the pressure of the cutter bar on the soil,
the weight of the trimmer is transferred from the soil surface to the tractor
Mowing surface following: -17 degrees / +23 degrees
2 high cut gears (possibility to cut 30 mm higher)
Double-height passes for high cutting - 2 pcs (60 mm cutting height option)
Crusher speed - 940 rpm
Walterscheidt PTO shaft with 6-groove fork
Required power take-off speed - 1000 rpm, can also work at -
850 rpm
Minimum tractor power required - 120 hp
Coupling category - III
Required hydraulics - 1 double
Weight - 1300 kg

In perfect condition, ready to work.